ANSI B16.11 Duplex SS S31500 Forged Elbow With LR Butt Weld 2 Inch 90 Degree

Overview

S31500 material is a duplex (austenitic-ferritic) stainless steel with characters as High resistance to stress corrosion cracking (SCC) in chloride, bearing environments, Good resistance to general corrosion and pitting, High mechanical strength, roughly twice the proof strength of austenitic grades, Good resistance to erosion corrosion and corrosion fatigue, Physical properties that present design advantages, Good weldability.

Characterized by the following properties:

High resistance to stress corrosion cracking (SCC) in chloride-bearing environments

Good resistance to general corrosion and pitting
High mechanical strength – roughly twice the proof strength of austenitic grades

Good resistance to erosion corrosion and corrosion fatigue
Physical properties that present design advantages

Good weldability

Application

Oil refineries
Pulp and Paper industry
Chemical industry
Food industry
Petrochemical plants
ety panels

Chemical Composition

Mechanical Properties 

Corrosion Resistance

Duplex steel UNS S31500 has impressive properties, making it a sought-after material among multiple industries. It is known for its corrosion resistance and high strength, and toughness. This makes the alloy suitable for projects that require superior corrosion resistance, like sea water piping or marine use, chemical industry and food processing equipment. The combination of good strength, excellent corrosion resistance and high toughness, even at low temperatures, make duplex steel UNS S31500 an ideal choice for demanding applications since it provides more cost-effective solutions than other alloys.

Heat Resistance

Duplex steel UNS S31500 is known for its superior heat resistance properties compared to conventional stainless steel alloys. Due to its two-phase microstructure, the alloy shows excellent oxidation and corrosion resistance – even in harsh environments. In addition, it has a higher chromium content which helps it withstand elevated temperatures without losing ductility or toughness. This makes Duplex steel UNS S31500 an ideal choice for applications such as wall panels and linings in chemical processing units, marine equipment and pressure vessels operating at extreme temperatures.

Heat Treatment

This alloy is resistant to pitting and crevice corrosion and retains its strength when exposed to temperatures up to 600°C. To achieve these amazing performance levels, S31500 must be heat treated carefully to maintain the balance between its ferrite and austenitic structures. During heat treatment, the alloy may undergo several cycles of heating and cooling to reach the desired level of toughness and corrosion resistance. Once it has been heat treated, duplex steel UNS S31500 can be used for components that require long-term exposure to corrosive environments or extreme temperature fluctuations.

Shipping

ASTM A403 WPS31254 Pipe Fittings is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D.

Image