|No999 .wenzhou airport wenzhou city,zhejiang firstname.lastname@example.org|
Payment & Shipping Terms:
|Material:||Alloy C276 / N10276 / 2.4819 / NiMo16Cr15W||Standard:||/ A240 / B409 / A358|
hastelloy c22 pipe,
inconel pipe welding
Alloy C276 / N10276 / 2.4819 / NiMo16Cr15W Nickel Alloy Pipe / A240 / B409 / A358 seamless or weleded
Our company always adheres to the quality principle of "strict inspection, continuous improvement, guarantee material quality", and we are pursuing the business philosophy:Integrity, pragmatism, cooperation and win-win.
We warmly welcome friends at home and abroad to contact us for cooperation based on mutual benefits for a bright and successful future.
Mechanical Properties and Other Requirements
1 Mechanical Properties—The material shall conform to the mechanical properties prescribed in Table 2. One test is required for each lot as defined in Specification B751.
2 Flattening Test Requirements:
2.1 Evidence of laminated or unsound material or of incomplete weld that is revealed during the entire flattening test shall be cause for rejection.
2.2 Surface imperfections in the test specimens before flattening, but revealed during the flattening test, shall be judged in accordance with the finish requirements.
2. 3 Superficial ruptures resulting from surface imperfections shall not be cause for rejection.
2. 4 One test is required for each lot as defined in Specification B751.
3 Flange Test Requirements:
3. 1 Flange test specimens shall show no cracking or flaws.
Superficial ruptures resulting from surface imperfections shall not be cause for rejection.
3. 2 For tube less than 0.093 in. (2.36 mm) in inside diameter and tube having a wall thickness equal to or greater than the inside diameter, the flange test shall not be required.
3. 3 One test is required for each lot as defined in Specification B751.
4 Hydrostatic Test—When tested by the manufacturer,each tube shall be subjected to the hydrostatic test per Specification B751.
|ITEM:||Alloy C276 / N10276 / 2.4819 / NiMo16Cr15W Nickel Alloy Pipe / A240 / B409 / A358 seamless or weleded|
|Brand:||RONSCO,BAOSTEEL, JISCO, TISCO, etc.|
|Material:||Alloy 800,800H,800HT,600,C276,601,625,825,Alloy 22,Alloy C4ect. Or Customized|
|Standard:||GB, AISI, ASTM, ASME, EN, BS, DIN, JIS|
|Size:||ANSI /ASME size is under,other standard of size is for ready choice,O.D.:0.23''to 48''(5.8-1219mm)W.T.:0.04''to 2''(1.0-50.8mm)|
|Length:||Max.18 Meter,NPS 1/8''-48'' Schedule:5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S according to ANSI B36.19/36.10|
|Surface:||Satin Finish(180#.240#.320#).,Bright Finish(400#,600#,mirror),Mill Finish(2B),Hairline-Finish(HL/Brushed),Ti-gold, Glossy matt,dull and so on.|
|Application:||Decoration, construction and upholstery, etc|
|Package:||Each tube in a plastic bag with size label outside and pack in small bundles or according to customer request|
|Lead Time:||7-10days for one FCL Or according to order list detail|
|Payment:||A: 100% T/T advance. ( For small order.) B: 30% T/T and balance against copy of documents.
C: 30% T/T advance, balance L/C at sight D: 30% T/T , balance L/C usance
E: 100% L/C usance. F: 100% L/C at sight.
|Sample:||we could offer the sample for free charge but do not pay the cost of freight.|
Heat Treatment Assurance
A full-automatic natural gas furnace with 24 meters in length.The real temperature tolerance could be within 10℃.
1~ Incoming Raw Material Inspection
2~ Raw Material Segregation to avoid steel grade mix-up
3~ Heating and Hammering End for Cold Drawing
4~ Cold Drawing and Cold Rolling, on line inspection
5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T
6~ Straightening-Cutting to specified length-Finished Measuring Inspection
7~ Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc
8~ Packing and Stocking
Contact Person: sales