Product Details
Place of Origin: CHINA
Brand Name: zheheng
Certification: ISO9001 PED
Model Number: 25mm
Payment & Shipping Terms
Minimum Order Quantity: Negotiable
Price: Negotiable
Packaging Details: In bundles with waterproof material,or wooden crate packing
Delivery Time: 30 DAYS
Payment Terms: L/C, T/T, D/A, D/P
Supply Ability: 50TONS/30DAYS
Material: |
X5CrNi18-20/1.4301 |
Standard: |
EN 10216-5 |
Type: |
Seamless |
Technique: |
Cold Roll |
Inspection: |
100% |
Application: |
Heat Exchanger |
Material: |
X5CrNi18-20/1.4301 |
Standard: |
EN 10216-5 |
Type: |
Seamless |
Technique: |
Cold Roll |
Inspection: |
100% |
Application: |
Heat Exchanger |
EN 10216-5 / X5CrNi18-20/1.4301 Seamless Stainless Steel pipe/Tube for Heat Exchange/Boiler
1, Commodity: stainless steel pipe/tube 304pipe, stainless steel weld pipe/tube,
2, Standards: ASTM, EN ,GB,DIN, JIS etc .
3, Grade: 200,300,400 series
4,Material : 201,202, 304 , 304L, 321, 409, 430 etc
5, O.D: 6-500mm
6, W.T: 0.5-20mm
7, Length: 5.8m (or according clients' requirements)
8, Surface: Mirror Polish,Satin Polish,Without Polish,NO.1,NO.4
9, Quality: MTC will be provided with goods, third part inspection is acceptable,
for example BV,SGS
product description:
| Size Range: | |
| Outer Diameter | Tolerance |
| 6~30 | 0.15/-0.2 |
| >30-50 | ±0.30 |
| ≤50 | ±0.75%D |
| Wall Thickness | Tolerance |
| D≤38 | 20%/t, -0 |
| D>38 | 22%/t, -0 |
| Bend | Tolerance |
| T≤15 | 1.5mm |
| T≤15 | 1.5mm |
Chemical Composition(%):
| Steel Number | C | Si | Mn | P | S | N | Cr | Ni |
| 1.4301 | ≤0.07 | ≤1.00 | ≤2.00 | ≤0.04 | ≤0.015 | ≤0.11 | 17.0-19.50 | 8.00-10.50 |
Merchanical Properties:
| Steel Number | Tensile properties at room temperature | Impact prpperties | ||||||
| Proof strength | Tensile strength Rm | Elongation Amin(%) |
Minimum average absorbed energy KV (J) |
|||||
| Rp0.2 min |
Rp1.0 min |
at RT | at-196℃ | |||||
| Mpa | Mpa | Mpa | l | t | l | t | t | |
| 1.4301 | 195 | 230 | 500-700 | 40 | 35 | 100 | 60 | 60 |
production range:
| Austenitic Steel: | TP304,TP304L,TP304H,TP304N, TP310S,TP316,TP316L,TP316Ti,TP316H, TP317,TP317L, TP321, TP321H,TP347, TP347H,904L… |
| Duplex Steel : | S32101,S32205,S31803,S32304,S32750, S32760 Others:TP405,TP409, TP410, TP430, TP439 ... |
| Russia Standard | 08Х17Т,08Х13,12Х13,12Х17,15Х25Т,04Х18Н10,08Х20Н14С2, 08Х18Н12Б, 10Х17Н13М2Т,10Х23Н18,08Х18Н10,08Х18Н10Т, 08Х18Н12Т,08Х17Н15М3Т, 12Х18Н10Т,12Х18Н12Т,12Х18Н9, 17Х18Н9, 08Х22Н6Т, |
| European Standard | 1.4301,1.4307,1.4948,1.4541,1.4878,1.4550,1.4401,1.4404,1.4571, 1.4438,1.4841,1.4845,1.4539,1.4162, 1.4462, 1.4362, 1.4410, 1.4501 |
Tolerances on outside diameter and wall thickness:
The diameter and the wall thickness of the tubes shall be within the relevant tolerance limits given in Table 12 for
hot finished tubes and in Table 13 for cold finished tubes. Tolerance classes T1 to T4 and D1 to D4 were taken
from EN ISO 1127.
Out of roundness is included in the tolerances on diameter and eccentricity is included in the tolerances on wall
thickness.
Type of inspection
Conformity to the requirements of the order, for tubes according to this part of EN 10216, shall be verified by
specific inspection.
When an inspection document 3.1.B is specified the material manufacturer shall state in the confirmation of the
order whether he is operating according to a “quality-assurance system”, certified by a competent Body established
within the Community, and whether he has undergone a specific assessment for materials.
product show:
Video
